Main Page

 

Misc.

Photo Galleries

 

About me& my Website

 

Stuff for sale/trade


Misc. Hobby

Aquariums

 

3D Graphic Design


Garden & Crafts


Woodworking Projects


Sci-Fi


Sports/ Outdoors
Deer Hunting

Downhill Skiing


Automotive
Project Big Bronco

My F-150

My Thunderbird


Electronics & High Voltage
EMP Guns & Launchers

 

Electronics projects

Small Tesla Coil Page

Large Tesla Coil 

Miniature Dual Tesla Coil

 

Quarter Shrinker

EMP Cancrusher

Railgun

Exploding Wire

Old High Voltage Page

 

Wood Projects:

Here are some of the wood projects I have built in the last few years. I am not an expert carpenter or a master craftsman, just someone with some tools and someone who likes the natural beauty of wood. 

Adirondack Chairs

Misc. Projects

adirondack5.JPG (55391 bytes) A finished Adirondack chair. Stained with golden oak and finished with an indoor/outdoor spar uruthane. planter1.JPG (75861 bytes) Here is a 3-tier planter I made out of cedar (its crooked because its just sitting in empty holes - not cemented in place yet). 
adirondack2.JPG (52070 bytes) There I am, working on the base of the chair. spicerack3.JPG (48363 bytes) A simple spice rack.
adirondack4.JPG (64497 bytes) Starting the back slats. Pine was used in all of my first few chairs I made to keep costs down. largeshelf.JPG (45095 bytes) A large shelf I made all out of 2x4 lumber and topped with 1/8" hardboard. I made a matching smaller shelf too.
adirondack6.JPG (56227 bytes) Screwing the seat slats into place. I used shims to get the spacing equal. shelf1.JPG (67175 bytes) A 'knock-down' style bookshelf, unfinished.
adirondack7.JPG (54945 bytes) Everything assembled, and a radius was cut across the top. Filled in all the screw heads with wood filler. sawhorses.JPG (47030 bytes) A pair of sawhorses I built.

Tool Dock

tooldock3.JPG (50080 bytes) Completed tool dock. Trays slide out (tools attached) and hook onto the top of a mobile stand (not pictured yet). key3.JPG (35343 bytes) A simple key holder. Its the first thing I made using a router. Red oak with a cherry polyshades finish.
tooldock1.JPG (47734 bytes) At the beginning of the project. A 2x4 frame. compdesk2.JPG (40352 bytes) A computer desk I built. I have built two of these for my computer room. After this pic was taken I added molding to cover the exposed ends of the white top piece.
tooldock2.JPG (58546 bytes) Here I am installing the supports. compdesk1.JPG (49233 bytes) Here is a construction shot of the desk.

Workbench

P1010137.JPG (51756 bytes) Here is a workbench I built out of 2x4's, plywood, and hardboard. Easy to build and super-heavy-duty. shoerack.JPG (54713 bytes) A shoe rack.
P1010133.JPG (42115 bytes) The beginning... Building the legs.
P1010134.JPG (47427 bytes) Attaching the legs and lower shelf rails.
P1010136.JPG (52780 bytes) Two layers of osb top it off. And a piece of hardboard will finish it off.
 

This page was created on 6/22/05 and last updated on 6/23/05.

 

Thank you for viewing my website! Click on the email picture to the left to get my email address.

If you have trouble viewing my pages you can try my backup site at:

http://tristan.someplaceinohio.homelinux.net/

Or my outdated website on Tripod full of popups at:

http://members.tripod.com/extreme_skier/